How To Reconnect Shark Robot To WiFi

Connecting and reconnecting your shark robot to WiFi is a simple and easy process. You can use this procedure for all shark robot models, including Shark AI, Shark ION, etc. First, make sure your phone is connected to the WIFI network you want to use and disable your VPN or adblocker software. If your Shark Robot was previously connected to a different network, reset its WiFi settings. This clears the previous configuration and puts your robot in pairing mode, which makes a reconnect easier to do. You can also delete the Shark Robot vacuum from the Shark app and perform a fresh setup. To delete your Shark Robot on the app, Tap the Menu icon > go to settings > select your Shark Robot > select delete robot.

Once you’re ready, here’s how to connect your Shark Robot to WiFi:

Open the Shark Clean app on your phone.
Set up an account.
Activate your robot’s WiFi. Make sure the robot is turned on and hold the Dock and Clean, or Dock and MAX for shark ION, buttons continuously for 5 – 10 seconds until the WiFi indicator light blinks.
Select a robot. Exit the app and go to WiFi settings. Choose your robot model from the drop-down list, then return to the Shark Clean app.
Select your WiFi network and enter the WiFi password. Make sure to select a 2.4 GHz network if you have access to more than one network.
Once you connect to the network, a success screen should appear, and the WiFi icon on the robot should turn a solid blue.

Connecting a Shark Robot Vacuum to WiFi is a quick and easy process that requires a WiFi signal and a smart device to use the Shark Clean app. The app will guide you along the process with simple-to-follow prompts.

How To Reconnect Shark Robot to WiFi

Connecting your shark robot to WiFi for the first time is very simple. However, if you change routers or have a WiFi issue that disconnects the Shark from WiFi, you may have to redo the process completely. For some reason, reconnecting a Shark Robot Vacuum to WiFi isn’t as simple as it should be.

Make sure that your phone is connected to the same WIFI network as your Shark, and disable your VPN or adblocker software.
Since your robot vacuum was previously connected to a network, you may need to reset your WiFi settings. This deletes the previous configuration and puts your robot in pairing mode so it can reconnect to WiFi.

You may have to delete your Shark Robot Vacuum from the Shark app and do the entire setup process again. Here’s how to delete your shark vacuum from the app; Tap the Menu icon > Go to settings > select your shark robot > select Delete Robot.

Once the old configuration is deleted, you can reconnect your Shark to WiFi with a fresh configuration. This is the best way to do it because your old settings may have caused an issue.

Before You Begin:

Make sure your phone is connected to the WiFi network you want to use.
Disable any VPN or ad blocker software on your phone.

Reset WiFi Settings (If Needed):

If your robot was previously connected to a different network, reset the WiFi settings to enter pairing mode.

Option 1: Reset Shark Robot on App

Delete the Shark robot vacuum from the Shark app.
Set it up again on the new network.
To delete your shark vacuum on the app: Tap the Menu icon > Go to settings > select your shark robot > select Delete Robot.

Option 2: Connect Shark Robot to WiFi

For Android Users:

Download the Shark Clean app from the Google Play Store.
Follow the app’s instructions to locate your Shark robot model and connect it to WiFi.

For iOS Users:

Download the Shark Clean app from the App Store.
Follow the app’s instructions to locate your Shark robot model and connect it to WiFi.

Once your Shark Robot is connected to WiFi, you can control it remotely, schedule cleaning sessions, and utilize its smart features over your WiFi network via the Shark app.

Recommended Shark Robot Vacuum Models:

The following models are my 3 favorite Shark Robot Vacuums. I recommend checking them out if you’re in the market for a new one.

Shark AI Robot Vacuum (RV2001): Smart Mapping, Scheduling, Pet Hair Pick Up, Logical Navigation. Price: $219.99.

Shark AV993 IQ Robot Vacuum: Self Cleaning Brushroll, Advanced Navigation, Perfect for Pet Hair, Compatible with Alexa, Wi-Fi, Black. Price: $289.99.

Shark AV2001 AI Robot Vacuum: Self-Cleaning Brushroll, Object Detection, Advanced Navigation, Home Mapping, Perfect for Pet Hair, Compatible with Alexa, Gray. Price: $163.50.

How To Connect a Shark Robot to WiFi Using IOS

Connecting a Shark Robot to WiFi and reconnecting it after you’ve changed networks or routers is exactly the same. The only difference is that you should delete the old configuration before reconnecting. This essentially starts the process over again, which makes connecting easier.

Open the Shark Clean app on your iPhone or iPad.
Create an account using your email and a suitable password.
Activate your robot’s WiFi by ensuring it is powered on and holding the Dock and Clean (or Dock and MAX for Shark ION) buttons continuously for 5-10 seconds until the WiFi indicator blinks.
Exit the app and go to your device’s WiFi settings.
Choose your robot model from the dropdown list in the WiFi settings.
Return to the Shark Clean app.
Select your WiFi network and enter the WiFi password. If you have multiple networks, choose the 2.4 GHz network.
A success screen appears, and the WiFi icon on the robot turns solid blue if the connection is successful.

Once you connect your Shark Robot to WiFi, you’ll be asked to name and register the vacuum. Scan the QR code on the bottom of your robot with your phone to register its model and serial number automatically.

Once your shark robot is connected to the WiFi network, you can set up voice controls using Amazon Alexa or Google Home.

How To Connect a Shark Robot to WiFi Using Android

Connecting a Shark Robot to WiFi using an Android device is almost exactly the same as using IOS.

Open the Shark Clean app on your Android phone or tablet.
Set up an account using your email and a suitable password.
Activate your robot’s WiFi by ensuring it is powered on and holding the Dock and Clean (or Dock and MAX for Shark ION) buttons continuously for 5-10 seconds until the WiFi indicator blinks.
Select your WiFi network and enter the WiFi password. If you have multiple networks, choose the 2.4 GHz network.
A success screen appears, and the Wi-Fi icon on the robot turns solid blue if the connection is successful.

Does A Shark Ion Robot Need WiFi?

The Shark Ion Robot can function without WiFi for basic vacuuming tasks. However, to unlock a host of exciting features, connecting your Shark robot to WiFi is essential. I recommend using all Shark Robot models with WiFi because you gain lots of additional functions and features. My favorite is the ability to control the robot remotely from wherever I am using the Shark app and my smartphone.

Here are some of the benefits of connecting your Shark Robot to WiFi:

Remote Control: Connect your Shark robot to your home WiFi network to control it remotely. Through the app, you can pause, resume, or start cleaning jobs conveniently.
Custom Schedules: Set personalized cleaning schedules for your Shark robot when it’s connected to WiFi. This way, it can clean according to your preferred timings.
History: A connected Shark robot provides detailed reports of its activities. You can access the history page containing up to 30 days of your robot’s cleaning tasks.
Adjustable Cleaning: Different surfaces demand varying suction power for effective cleaning. With a connected Shark robot, you can easily adjust its cleaning power as needed.

How Do I Reset My Shark Ion Robot’s WiFi?

If you need to start fresh with your Shark Ion robot’s WiFi connection, follow these simple steps:

Reboot WiFi Router: Unplug your Wi-Fi router’s power cord, wait for 60 seconds, then plug it back in.
Restart Shark Robot: Turn off your Shark robot’s power button, wait for 20 seconds, then turn it back on.
Phone Restart: Restart your smartphone to ensure a clean slate for the connection process.

After completing these three steps, you’re ready to establish a new connection. Use the Shark Robot Clean App and follow the provided instructions to connect your Shark robot to WiFi.

How to Factory Reset a Shark Robot

If you need to erase your Shark robot’s connection history and restore default settings, perform a factory reset using these steps:

Launch the Shark Clean App on your smartphone.
Navigate to settings within the app.
Select the “Factory Reset” option.

The Shark robot will initiate the factory reset process, which may take a few minutes. Once completed, the robot will be restored to its default settings, and all data will be removed. Additionally, the robot will be removed from the app, requiring you to reset the robot and establish a new connection.

How To Reconnect Your Shark Robot to the App

To reconnect your Shark robot to the app, you must activate WiFi mode. Press and hold both the dock and Max buttons on your robot until you hear a beep. The WiFi light will flash, indicating that the robot is now in WiFi mode and ready to connect. If you have a strong and stable WiFi signal in range of your Shark Robot, it will connect.

If you’re having trouble connecting your Shark Robot to WiFi, check your modem and router. In most cases, a reset will fix the issue. Unplug the power cord from the back of your router and modem, wait for a minute or two, then plug it back in. This can help reset your connection and potentially improve WiFi speed.

Is There a Reset Button on a Shark Robot Vacuum?

A Shark Robot vacuum does not have a dedicated reset button. However, there are still ways you can reset the device.

If your Shark vacuum isn’t functioning properly, try these steps to reset it:

Power Off and Unplug: Put the Power button in the Off position and unplug the vacuum. This simple reset may resolve minor issues.
Check for Blockages: Ensure there’s nothing blocking the hose or any other parts. Clear out any obstructions.
Cool Down and Replug: Allow the vacuum to cool down, then plug it back in. It should start working again.

Here’s how to factory reset a Shark Robot using the mobile app:

Make sure your robot vacuum is connected to the official Shark ION app.
Open the app and go to the Settings section.
Find the ‘Factory Reset’ option, select it, and confirm the action.
The app will initiate the reset process, which usually takes only a few seconds.

Can you use Shark Robots without WiFi?

Yes, you can use a Shark Robot without WiFi. However, without WiFi, you won’t be able to access all the robot’s functions and more advanced features like voice control via the app. By using WiFi, you can do things like set cleaning schedules, send your robot to clean certain rooms or spots on-demand in UltraClean Mode, mark areas for your robot to avoid cleaning, and more.

Do You have to Connect iRobot to WiFi?

No, connecting iRobot to WiFi isn’t necessary for Roomba® and Braava jet® to clean. While the iRobot HOME App offers various advantages, basic functions like Clean, Dock, and Spot Clean don’t require a WiFi connection.

To use an iRobot without WiFi, just turn on the power switch, put the robot on the dock, and press Clean. Your robot will take care of the cleaning process without the need for WiFi connectivity.

Can you use the Shark IQ robot without a smartphone?

Yes, you can use the Shark IQ robot without a smartphone. The iRobot Roomba is designed to manually start and clean by pressing a button on the vacuum itself. You only need to use your phone to receive notifications if it gets stuck. However, connecting the robot to WiFi and a smart device unlocks some advanced features like setting cleaning schedules and using voice controls.

What is the black button for on the back of a shark vacuum?

The black button on the back of a Shark vacuum is used to detach the vacuum head from the vacuum body. If you notice the Clean RED or Max light flashing, it indicates that the robot may be stuck on an obstacle or the front bumper might be jammed.

To fix the problem, move the robot to a different location and check the bumper for any obstructions. If the light continues to flash, try removing the front caster wheel and cleaning the wheel housing.

Why is my Shark Robot Vacuum light flashing?

If your Shark robot vacuum’s light is flashing, it could indicate a few different issues, such as an obstruction, a bumper jam, a low battery, poor WiFi connection, a software update, or an error code.

Obstruction: The robot may be stuck on an obstacle or have something blocking its movement. Relocate it to a different spot and check for obstructions.
Bumper Jam: The front bumper might be jammed, hindering the robot’s navigation. Inspect the bumper and clear any obstructions.
Low Battery: The flashing light may signal low battery. Charge the robot to resolve the issue.
WiFi Connection: If the robot is Wi-Fi-enabled, a flashing light might indicate a Wi-Fi connection problem. Check your network settings and ensure it is properly connected.
Software Update: Some models flashlights during software updates. Allow the update to complete, and the light should stop flashing.
Error Code: Refer to the user manual or contact customer support to interpret specific error codes indicated by the flashing light.

Identifying the specific cause of the flashing light will help you troubleshoot and fix the issue more effectively. I use a Shark Robot at home and at work, and the issues are usually easy to fix. The robots are very reliable, and I’ve never had any major issues.

Why Did My Shark Robot Disconnect From WiFi?

There are a few reasons why your Shark Robot may have disconnected from WiFi. These include a weak signal. If your robot is losing its WiFi connection frequently, it might be due to a weak signal in its location. Consider placing your router in a more central location so the signal can travel throughout the house.

Router Issues are another potential problem. A slow or erratic WiFi signal can cause your Shark Robot to disconnect. It can usually be resolved by rebooting the router or updating its firmware. To do it, simply unplug the router’s power cord, wait for 30 seconds, and plug it back in. This often resolves connectivity problems.

Typically, a Shark Robot that disconnects is caused by the WiFi signal, not the robot. Make sure your router and modem are working properly and that the signal is strong enough to reach where the robot is working. If your router can’t broadcast a WiFi signal to where your Shark Robot is working, consider installing a WiFi extender.

Summary: How To Reconnect Shark Robot To WiFi

How to reconnect your shark robot to WiFi is a simple process. You can use this procedure for all shark robot models, including Shark AI, Shark ION, etc. First, make sure your phone is connected to the WIFI network you want to use and disable your VPN or adblocker software. If your Shark Robot was previously connected to a different network, reset its WiFi settings. This clears the previous configuration and puts your robot in pairing mode, which makes a reconnect easier to do. You can also delete the Shark Robot vacuum from the Shark app and perform a fresh setup.

To delete your Shark Robot on the app, Tap the Menu icon > go to settings > select your Shark Robot > select delete robot.

Once you’re ready, here’s how to connect your Shark Robot to WiFi:

Open the Shark Clean app on your phone.
Set up an account.
Activate your robot’s WiFi. Make sure the robot is turned on and hold the Dock and Clean, or Dock and MAX for shark ION, buttons continuously for 5 – 10 seconds until the WiFi indicator light blinks.
Select a robot. Exit the app and go to WiFi settings. Choose your robot model from the drop-down list, then return to the Shark Clean app.
Select your WiFi network and enter the WiFi password. Make sure to select a 2.4 GHz network.
Once you connect to the network, a success screen should appear, and the WiFi icon on the robot should turn a solid blue.

Connecting a Shark Robot Vacuum to WiFi is a quick and easy process; the app will guide you along the process with simple-to-follow prompts.

If you have any questions or comments about how to reconnect a Shark Robot to WiFi, email any time.