Samsung TV Auto Program Not Working

Samsung Smart TV Auto Program scans all the channels that are picked up by your antenna. These are free channels broadcast over the air that you don’t need cable to watch. You should run a scan every time you adjust your antenna to see if new channels become available. Your Smart TV will only broadcast the channels with a strong enough signal to be shown with good pictures and sound and will filter out the fuzzy channels. This is an essential function for people who watch TV via an antenna instead of cable. If your Samsung TV Broadcast Auto Program is not working, you won’t be able to find any channels.

Samsung TV’s broadcasting feature is popular for people without cable TV because it’s how they find channels to watch. But it can be frustrating when it doesn’t work or shows “broadcasting unavailable.”

Here are some simple steps to resolve the problem:

Check Broadcast Settings: Go to “Settings” in the menu and select “Broadcast.” Make sure the settings are correct and functioning.
Confirm TV Connection: Verify that your Samsung TV is connected properly. Check the “Source” menu to make sure a connection is established.

If it says unavailable, this is the easiest way to get Broadcast Auto Program working on Samsung TV.

If you still can’t get Auto Program working, look through your TV’s menus for a function called “Channel Scan” or “Auto Scan.” Depending on your Samsung TV model, the”Auto Program” function may have slightly different wording.

Samsung TV Broadcasting Auto Program Not Available

Samsung Smart TV has an auto-scan function that scans all the channels picked up by your antenna that are broadcast over the air for free. These are completely free channels that you don’t have to pay a cable network to watch. The “Auto Program” function is in your TV’s settings menu under “Broadcast.” If Auto Program isn’t working or showing up, do the following.

If your Samsung TV Broadcasting Auto Program is not available, you’ll need to reset it to get it working again. Press “Menu” > scroll down to “Broadcast” > select “Channels” > select “Auto Program” > select the option for what channels you want to search for.

I recommend searching for air channels and cable channels if you use both an antenna and cable. Scanning for channels can take a while, depending on how many are available in your area. Sometimes, it can take several hours to complete and show all your channels on the TV.

Once the Auto Program channel scan is complete, all the available channels will show on your TV. You should then go into your TV settings and adjust them to find the best Samsung TV picture settings, so your picture quality will look as good as possible. To find out what the best settings are and how to change them click the link.

Fixing Samsung TV Broadcasting Auto Program Issues

If you’re facing problems with the auto-scanning and programming of broadcasting channels on your Samsung Smart TV, don’t worry, There’s a simple trick to get it working again.

Reset Auto Program:

Press the “Menu” button on your remote.
Scroll down to “Broadcast.”
If the “Chanel” icon isn’t highlighted, go to “Sources” and select “TV” to turn on the source.
Go back to the “Menu” and choose “Channels.”
Look for the “Auto Program” option and select it.

Choose what channels to Auto-Connect:

Turn on both the air and cable channels. This will enable your TV to scan and load all available channels.
Be patient, as all the channels may take some time to load.

If you follow these steps, your Samsung TV broadcasting auto program should work smoothly, and you’ll have access to all the channels available in your area.

Samsung TV Broadcasting Grayed Out/Disabled

If your Samsung TV broadcasting icon appears grayed out, the broadcasting function has been disabled. When this happens, you won’t be able to access the Auto program function to scan for broadcasted over-the-air free channels. However, it’s pretty easy to fix the problem and get broadcasting working again.

If your Samsung TV’s broadcasting icon appears grayed out or disabled, follow these easy steps to fix the issue:

Check Source Settings: Press the “Home” button on your remote and click on the “Source” button in the top right corner. Make sure the “TV” icon has a green check mark, indicating it’s turned on.
Access Settings: Go to the bottom of the screen and select “Settings.” If the “Broadcasting” icon was disabled due to the source being off, it should no longer appear gray.

If the Broadcasting icon is still gray, try resetting the TV or using the Service Menu to get it working again.

Power Cycle TV: If the icon is still gray, unplug your TV from the power source for 5 to 8 minutes. Then, reconnect and turn on your TV. Check if the “Broadcasting” icon is now active.
Use Service Menu: If the problem persists, power off your Samsung Smart TV and use the remote to press “Mute,” 1, 8, 2, and power. The “Service Menu” will appear on the top left side. Select “Control” and scroll down to “Shop Options.” Make sure “Peak Mode” is off by toggling it to the off position. Turn your TV off and on again and check the “Source.”

Samsung TV Broadcasting: “This Function Is Not Available”

If you encounter the alert “This function is not available” on your Samsung TV, it might be due to a remote pairing issue or the broadcasting function being turned off.

Here’s how to fix it:

Check Broadcasting Services: Go to the settings menu and select “Source.” Make sure your TV shows it is connected. If not, connect to the source and return to the settings menu. Then, enter “Broadcasting” and make sure the icon isn’t gray. Reset the broadcast settings if needed.
Remote Troubleshooting: If the issue persists, it could be a problem with your remote. Turn off your Samsung TV and unplug it from power for about five minutes. Then, plug it back in and turn it on. Hold both the “Return” and “Play” buttons on your remote simultaneously. This will reset your Samsung TV remote and should restore broadcasting services.

Samsung TV Broadcasting Menu Is Not Available

If your Samsung TV broadcasting menu is not accessible, the “Broadcast” icon will appear grayed out, and you won’t be able to select any menu options. Your TV is likely accessing the wrong source settings, causing the broadcasting menu to be unavailable.

To fix it, do the following:

Press the “Source” button in the top right-hand corner using your remote.
Select “TV” as the source instead of HDMI.
Return to the “Broadcast” menu, and now you should be able to access it without any issues.

Samsung TV Broadcasting Not Showing

If your Samsung TV is not showing a picture, but you can hear the sound, follow these steps to fix the issue:

Power Cycle TV: Unplug your Samsung TV from the power source and wait for at least 60 seconds before turning it back on. Check if the picture appears when you try to watch broadcasting.
Check HDMI and Connections: Make sure your HDMI cable is securely attached. If you use a Roku or Fire Stick, make sure they are connected properly. Try using a different HDMI port on your TV.
Hard Reset: If the problem persists, perform a hard reset. Press the ‘Home’ button on your remote, select ‘Settings,’ then go to ‘Support,’ and click ‘Self Diagnostics.’ Choose ‘Reset,’ but remember that this will erase all your settings.

Samsung TV Broadcasting Can’t Access

If you’re unable to access broadcasting channels on your Samsung TV, follow these steps to fix the issue:

Check Source Channel: Make sure you are on the right source channel. Switch your TV from HDMI to AVI and see if you can access your broadcasting channels.
Light Restart: If the problem persists, perform a light restart. Unplug your Samsung TV from the power source for 5 to 8 minutes, then plug it back in and turn it on. Check the source channel and ensure the ‘Broadcast’ settings menu is not grayed out.
Enter Service Menu: As a last resort, enter the ‘Service Menu’ by turning off your TV. Press “Mute,” 1, 8, 2, and power. Click the ‘Service Menu’ icon in the top corner and ensure that ‘peak mode’ is turned off.

Samsung TV Broadcasting Not Working/Available

If your Samsung TV broadcasting is not working or available, follow these steps to fix the issue:

Check Settings: Access the ‘Broadcasting’ and ‘Source’ sections in the settings menu. Ensure the broadcasting settings are turned on, and the correct source is selected.
Reset TV: If the problem persists, reset your Samsung TV. This will restart the system and may resolve any software glitches affecting broadcasting services.

Why is the auto-tuning function not available on my Samsung TV?

If the auto-tuning function is not available on your Samsung TV, it’s likely because your TV is currently using a set-top box or an external device. To enable the auto-tuning function, change the Source setting to TV, and you should be able to access and use the auto-tuning feature.

Why is my TV not auto-tuning?

Your TV may not be auto-tuning due to a faulty TV aerial. Before contacting an aerial company, try these troubleshooting steps: make sure the coaxial cable is correctly connected to the aerial or satellite input, and power down the TV and equipment, then power them back up after a few minutes. These simple checks may resolve the issue and restore the auto-tuning function on your TV.

How do I fix broadcasting greyed out on my Samsung TV?

To fix the “Broadcasting” option being greyed out on your Samsung TV, follow these steps:

Check Source Settings: Press the “Source” button on your remote and select “TV” to ensure the correct source is chosen.
Verify Broadcasting Settings: Go to “Settings,” then “Broadcasting,” and ensure the option is not greyed out. If it is, reset the broadcasting settings.
Power Cycle TV: Unplug your Samsung TV from the power source for a minute, then plug it back in and turn it on.

Other Possible Issues

If the broadcasting problem persists, consider these factors and their solutions:

Weak Signal: Make sure your TV is receiving a strong signal. Adjust the antenna or cable connection if needed.
Internet Connection: If you use internet-based broadcasting services, check your internet connection for stability and speed.
Software Updates: Update your TV’s firmware to the latest version, as outdated software can cause broadcasting issues.
Service Outages: Confirm if any service outages or maintenance are affecting your broadcasting provider.
Signal Interference: Electronic devices or physical obstructions near your TV could disrupt the signal. Relocate or remove such objects.
Factory Reset: As a last resort, perform a factory reset on your TV to clear any software glitches.

Remember to double-check your settings and connections after attempting each solution.

Summary: Samsung TV Auto Program Not Working

Here are some simple steps to resolve the problem:

Check Broadcast Settings: Go to “Settings” in the menu and select “Broadcast.” Make sure the settings are correct and functioning.
Confirm TV Connection: Verify that your Samsung TV is connected properly. Check the “Source” menu to make sure a connection is established.

If it says unavailable, this is the easiest way to get Broadcast Auto Program working on Samsung TV.

If you have any questions or comments about your Samsung Smart TV Auto Program not working, email any time.